Nail plug made of platic for exposed concrete for Gewindehülse-PLUS (Item-No. GWHP15/GH).
NEVO-CONNECT® the innovative screw connection for prefabricated reinforced concrete components enables direct screwing of reinforced concrete components for all standard connections of large panel construction. NEVO-CONNECT® combines the advantages of a dry connection with the requirements for the lowest possible assembly tolerances and the qualification of the staff used. The remaining recess after removing the recess body allows the system screws to be inserted through the screw guide set in concrete.
NEVO-CONNECT® the innovative screw connection for prefabricated reinforced concrete components enables direct screwing of reinforced concrete components for all standard connections of large panel construction. NEVO-CONNECT® combines the advantages of a dry connection with the requirements for the lowest possible assembly tolerances and the qualification of the staff used. The anchor block enables the connection of the system screws and with this the connection to the screw guide during the assembly of the wall elements.
All fall protections in one system. Many advantages - a multi-talent.
Magnet for mounting the Hohlwanddübel (Item No. HWDM12) on steel formwork.
Hohlwanddübel for temporary fastening of props and corner brackets on double and solid walls in the assembly state. The Hohlwanddübel is positioned on the formwork at the factory using hot glue. Best possible hold due to roughened adhesive surface with Ø 50 mm. A small recess in the adhesive plate ensures minimum consumption of hot glue. Alternatively, the Hohlwanddübel can be attached to steel formwork tables with an adhesive pad (double-sided adhesive on carrier foil). Positive side effect: No more hot glue runs into the screw guide! A wood screw DIN 571, Ø 12 x 70 mm is used for attachment of the prop to the Hohlwanddübel. The adhesive plate can be easily removed through a predetermined breaking point. Supplied without screw and washer.
Stacking plate with nubs for the storage and transport of precast concrete elements. Depending on the material (soft / hard), abrasion marks on the concrete surface may be possible. Type 2 divisible and can be used angled. Type 4 with 44 mm long hooks for hanging. Type 5 with plug-in coupling for extension as required.
Formwork plug made of high-quality plastic for closing holes in the formwork. Suitable for diameters from Ø 20 mm to Ø 26 mm. The tabs on four sides ensure a centred hold in the hole.
Wood screw according to DIN 571, Ø 12 x 70 mm for use with Hohlwanddübel "K" (Item No. HWD12) and Ø 12 x 80 mm for use with Hohlwanddübel "M" (Item No. HWDM12).
Hohlwanddübel for temporary fastening of props and corner brackets to double and solid walls in the assembly state. The Hohlwanddübel is positioned on the steel formwork with the reusable magnet. After stripping the formwork, the magnet usually remains on the formwork due to its high adhesive force. A wood screw DIN 571, Ø 12 x 80 mm is used for attachment of the prop to the Hohlwanddübel. Supplied without magnet, screw and washer.
Test sleeve (No. 47794) for the concrete screw MULTI-MONTI®-plus SSK 16 x 130 mm and 16 x 90 mm.
Hohlwanddübel-Plus for temporary fastening of props and corner brackets to solid walls in the assembly state. The Hohlwanddübel-Plus is positioned on the formwork at the factory using hot glue. Best possible hold due to roughened adhesive surface with Ø 50 mm. A small recess in the adhesive plate ensures minimum consumption of hot glue. Alternatively, the Hohlwanddübel can be attached to steel formwork tables with an adhesive pad (double-sided adhesive on carrier foil). Positive side effect: No more hot glue runs into the screw guide! Only the approved MULTI-MONTI®-plus SSK 16 x 90 mm concrete screw may be used for attaching the prop to the Hohlwanddübel-Plus. The adhesive plate can be easily removed through a predetermined breaking point. Supplied without screw.
