Linear, labour-saving plastic spacers for lower reinforcement with grid notches. The grid notches prevent the first reinforcement layer from slipping. The cut-outs ensure proper flow of the concrete without compromising stability and at the same time reduce the visibility of the spacer on the finished concrete surface.
Linear, labour-saving plastic spacers for lower reinforcement. The cut-outs ensure proper flow of the concrete without compromising stability and at the same time reduce the visibility of the spacer on the finished concrete surface.
Large-area tunnel spacer made of plastic for fixing the tunnel sealing film. The open construction ensures an optimal concrete flow. Awarded with the Innovation Prize at the Austrian Tunnel Day 2010.
Linear, labour-saving plastic spacers for lower reinforcement for all applications where the reinforcement has to be set against soft surfaces, e.g. insulation boards. For this purpose, the Drunterleiste is placed with the flat side on the insulation. With holes on the sides for better concrete flow without affecting stability.
Plastic cone for large-area transmission of the clamping forces and for protection of the formwork. Fitting length 15 mm.
Linear, labour-saving plastic spacers for lower reinforcement for all applications where the reinforcement has to be set against soft surfaces, e.g. insulation boards. For this purpose, the Drunterleiste is placed with the flat side on the insulation.
Large-area tunnel spacer made of plastic for fixing the tunnel sealing film.
Large-area and extra strong spacer, mainly for lower reinforcement. Extra good concrete flow because of large side and top cut-outs. Only limited suitable for fair-faced concrete and prefabricated slabs. Due to the better tilting stability, we recommend Drupak "2" from a concrete cover of 40 mm. Can be extended as required with plug-in coupling, production length 1 m.
Large-area and extra strong spacer, mainly for lower reinforcement. Extra good concrete flow because of large side and top cut-outs. The wave support at the top prevents the reinforcement from slipping. Only possible with Drupak "1". Only limited suitable for fair-faced concrete and prefabricated slabs. Due to the better tilting stability, we recommend Drupak "2" from a concrete cover of 40 mm. Can be extended as required with plug-in coupling, production length 1 m.
Tie rod sleeve for creating formwork clamping points on the construction site. By cutting the tie rod sleeve to length, the required lengths can be produced quickly on site.
Large-area and extra strong spacer, mainly for lower reinforcement. For all applications where the reinforcement has to be spaced against soft surfaces, e.g. insulation boards. For this purpose, the Drupak is placed with the flat side on the insulation. Extra good concrete flow because of large side and top cut-outs. Can be extended as required with plug-in coupling, production length 1 m.
